TOTA | 125 grain XL broadhead | 1-3/16-inch vented | fixed blade

XL Vented 4-Blade Broadhead — 125 Grain (3 Broadheads Per Pack)

One goal: Massive wound, surgical accuracy.

This XL vented 4-blade fixed broadhead gives you a huge cutting diameter without the drag penalty.

Machined in the USA from heat-treated high-carbon steel, the vented ferrule trims weight and stabilizes flight while the four cut-on-contact blades deliver a square wound channel and brutal blood trails. Razor sharp out of the box — silent, deadly, and ready to hunt.

Field-point flight. XL bite.

Durable vented ferrule — less wind-sensitivity, more straight-line accuracy.

Easy to resharpen, built to perform on trophy game.

Satisfaction guaranteed — no excuses.

Our Recommendation: Ideal for compound shooters seeking a large cut, extremely accurate fixed-blade for deer and bear sized game. Perfect for all bowhunters, beginner to advanced.

Tech Specs — XL Vented 4-Blade Fixed Broadhead

Grain Weight: 100 grain, 125 grain

Cutting Diameter: 1 3/16” (1.1875”)

Blade Count: 4

Blade Thickness: 0.040”

Blade Material: Heat-treated high-carbon steel

Ferrule Material: Heat-treated high-carbon steel

Tip Style: Tanto

Deployment: N/A (fixed blade)

Blades Replaceable: No — one-piece machined design

Blade Angle: 22.5° per side (45° total)

Made In: USA

Pack Size: 3 broadheads

Engineered for a large wound channel with minimal planing, and heat-treated for repeatable toughness.

Features

XL Cut, Field-Point Flight — Vented ferrule reduces drag and stabilizes the head so it flies like a field point while delivering a 1 3/16” cutting diameter on impact.

Vented Ferrule for Stability — Precision venting trims weight forward or aft (depending on your build) to reduce planing and improve in-flight stability at varying speeds.

One-Piece Machined Strength — Machined from a single bar and heat-treated for impact resistance — no seams, no weak spots.

4-Blade Cut-on-Contact — Square wound channel increases blood loss and tracking ease, especially valuable on larger game.

Razor-Ground Edge — 22.5° per side for a 45° total edge that balances bite and edge retention; resharpens easily in the field.

Tanto Tip Penetration — Reinforced point geometry designed to punch through hide, muscle, and bone without deformation.

Silent, Fixed-Blade Reliability — No moving parts, no rubber bands, no deployment failure — just consistent performance.

Beginner-Friendly Flight — Tuned to fly well even for shooters who are newer to broadheads, while still giving advanced archers the big-game performance they need.

Proudly Made in the USA — Fully machined, heat-treated, and packaged stateside.

FAQ

Q: Is this head only for experienced shooters?

A: No. While optimized for accuracy and a large cutting diameter, the vented XL is built to fly like a field point and is suitable for all archers — beginner to advanced — provided you use properly spined arrows and decent form.

Q: Will this fly like a field point?

A: Yes — the vented ferrule and compact profile reduce planing. When your bow is tuned and arrows are matched, expect field-point-level flight.

Q: What grain options are available for the XL vented?

A: 100 gr, and 125 gr.

Q: Are the blades replaceable?

A: No. This is a one-piece machined broadhead; blades are integral to the ferrule.

Q: What comes in each pack?

A: Each pack includes 3 broadheads.

Q: Is this suitable for deer and bear?

A: Yes. The large cutting diameter plus strong tanto tip make it an excellent choice for deer, hogs, and larger game like bear — use good shot placement and an appropriate arrow setup.

Q: Do I need a minimum draw weight or arrow speed?

A: There’s no strict minimum, but performance is best when arrows are spine-matched and your form is consistent. For very high arrow speeds you might consider heavier arrow builds to preserve spine stability.

Q: Why choose a vented head over solid?

A: Vented ferrules reduce unnecessary mass and improve aerodynamic stability, which helps reduce planing at various speeds while keeping the large cutting diameter and penetration performance.

Q: Is this made in the USA?

A: Yes — machined, heat-treated, and packaged in the USA.